If your pilot light keeps going out, your gas appliance is telling you something. That small blue flame has one job, and when it fails again and again, the cause is usually a worn safety part, a dirty pilot assembly, a draft or a venting problem. At Precision Plumbing Heating, Cooling & Electric, our licensed technicians have been servicing gas furnaces, boilers and water heaters in Louisville and Boulder County since 1982. Below, you will learn which appliances still use a standing pilot, the most common reasons the flame will not stay lit, what you can safely check on your own and when it is time to call a professional.
Tired of relighting the same pilot every few days? Let our team find the real cause.
Key Takeaways
- A pilot light that goes out once can be a fluke, but one that goes out repeatedly almost always points to a part or airflow problem.
- A worn or misaligned thermocouple is one of the most common reasons a standing pilot will not stay lit.
- Drafts, dirty pilot openings and blocked venting can all starve or disturb the flame, especially in older homes.
- A yellow, lazy or flickering pilot flame is a warning sign that combustion is not right and needs a technician.
- If you smell gas, leave the home right away and call Xcel Energy at 800-895-2999 or 911 from outside.
Many newer furnaces use electronic ignition instead of a flame that burns all the time. Plenty of Louisville homes still have at least one appliance with a standing pilot, though. Older furnaces, many tank-style gas water heaters, some boilers and a lot of gas fireplaces rely on that small, steady flame.
When it goes out, the appliance stops working. On a cold night in Coal Creek or Old Town Louisville, that can mean no heat, no hot water or both. The good news is that the causes are well understood, and most of them are straightforward for a trained technician to fix.
How a Standing Pilot Light Works
Understanding the basic setup makes it much easier to see why the flame fails. A standing pilot is a small gas flame that stays lit around the clock. When your thermostat or water heater control calls for heat, the main burner opens and the pilot ignites it.
The Role of the Thermocouple or Thermopile
The pilot flame does more than light the burner. It also heats a safety sensor called a thermocouple, or on some appliances a thermopile. As long as that sensor stays hot, it tells the gas control that a flame is present and it is safe to keep gas flowing.
If the flame goes out, the sensor cools and the control shuts off the gas. This is a safety feature, and it is the reason you lose heat or hot water instead of having unburned gas fill the room.
Why Repeated Outages Are a Clue
Because the system is designed to shut down whenever the flame is weak or missing, a pilot that keeps going out is rarely random. Something is either disturbing the flame, starving it of gas or air, or preventing the sensor from reading it correctly. Finding which one is the whole job.
Common Reasons Your Pilot Light Keeps Going Out

Our technicians see the same handful of causes again and again. Some are simple, and some need parts and testing.
A Worn or Misaligned Thermocouple
Thermocouples wear out over time. The tip can become coated, bent or simply weak with age. When that happens, the pilot may light fine but go out as soon as you let go of the control, or it may stay lit for hours and then drop out. A thermocouple that has been knocked out of position can also sit just outside the flame and never get hot enough.
A Dirty Pilot Opening
The pilot burns through a very small opening. Dust, lint, rust flakes and even spider webs can partially block it. The result is a small, weak or uneven flame that does not wrap around the sensor properly. Basements and garages, where many furnaces and water heaters live, collect a lot of dust, and our dry Front Range air does not help.
Drafts Near the Appliance
A strong draft can blow out a pilot or push the flame away from the sensor. Common sources include an open basement window, a nearby exhaust fan, a door that opens directly onto the appliance and gaps around an old access panel. Gusty Front Range winds that push air down a flue can do the same thing.
Venting and Air Supply Problems
Gas appliances need fresh air to burn and a clear path to send exhaust outside. A blocked flue, a bird nest in a vent cap, a disconnected vent pipe or a utility room that has been closed in can all upset the flame. This cause matters more than most because poor venting can also allow carbon monoxide to build up indoors.
Gas Supply Issues
If gas pressure is low or a supply line has a problem, the pilot may not get enough fuel to stay strong. Gas line and pressure work is never a do-it-yourself job. If you suspect a supply problem, our gas line repair team can test and correct it safely.
A Failing Gas Control Valve
Sometimes the thermocouple is fine and the flame looks healthy, but the control valve itself is failing to hold gas open. This takes testing with proper tools to confirm, and the fix is replacing the control, not adjusting it.
Not sure which of these is behind your problem? Talk to a technician today.
Which Appliance Is Losing Its Pilot
The causes overlap, but each type of appliance has its own common trouble spots.
| Appliance | What You Notice | Common Causes | Who Should Handle It |
|---|---|---|---|
| Older gas furnace | Blower runs cold air or the system will not start | Thermocouple wear, dirty pilot, drafts, venting issues | Licensed HVAC technician |
| Tank gas water heater | Lukewarm or cold water | Thermocouple wear, debris near the burner, drafts, venting issues | Licensed plumber |
| Gas boiler | Cold radiators or baseboards | Thermocouple or thermopile wear, control problems, air supply | Licensed heating technician |
| Gas fireplace | Pilot will not stay lit or burner will not start | Thermopile wear, dirty pilot, drafts down the chimney | Qualified gas appliance technician |
Furnaces
On an older furnace, a pilot outage means no heat at all, and on a cold night it becomes urgent fast. If your furnace has a standing pilot, it is likely older equipment, and repeated outages can be part of a bigger conversation about its age and condition. Our furnace repair technicians can diagnose the pilot problem and give you honest options.
Water Heaters
Many tank-style gas water heaters still use a standing pilot. When it goes out, hot water fades over a few hours. Sediment, debris around the burner and drafts in the garage are common culprits. Our water heater repair service handles thermocouple replacement, burner cleaning and control diagnosis. For other hot water problems, see our article on a water heater not heating.
Boilers
Older boilers in some Boulder County homes also use a standing pilot. Because a boiler heats the whole house, a pilot that keeps dropping out deserves prompt attention from our boiler repair team.
Gas Fireplaces
Gas fireplaces often use a thermopile and may be turned off for the whole summer. When you relight them in the fall, a dirty pilot or a weak thermopile can show up right away. Chimney downdrafts on windy nights are another common cause.
Warning Signs That Mean Stop and Call a Professional
Some pilot problems are a nuisance. Others are a safety concern. Watch for these signs.
You Smell Gas
Natural gas has an added odor that many people describe as rotten eggs or sulfur. If you smell it, do not try to relight anything. Do not flip light switches, use your phone indoors or create any flame. Get everyone out of the home, then call Xcel Energy’s gas emergency line at 800-895-2999 or 911 from outside.
Your CO Alarm Sounds
If a carbon monoxide alarm goes off, get everyone outside to fresh air and call 911. Do not go back in until responders say it is safe. Make sure you have working alarms near sleeping areas and on each level of the home. Our smoke and CO detector installation service can help.
The Flame Looks Yellow or Lazy
A healthy pilot flame is mostly blue with a steady shape. A yellow, orange, floating or flickering flame can mean incomplete combustion, a dirty pilot or an air supply problem. Leave it off and have it checked.
You Notice Soot or Scorching
Black soot near the burner opening, scorch marks on the appliance or heavy condensation on nearby windows are all signs that combustion or venting may not be right. These need professional attention.
You Have Relit It More Than Once
Relighting a pilot over and over does not fix the cause. If it has gone out more than once, it is time for a technician to test the parts and the venting.
What You Can Safely Check on Your Own
You can do a few simple things before you call. None of them involve opening gas controls, removing burner parts or adjusting anything inside the appliance.
Look for Obvious Drafts
Check whether a window near the appliance is open, whether a fan is running nearby or whether a panel cover is missing. Closing a window or putting a panel back in place sometimes solves the problem.
Clear the Area Around the Appliance
Keep storage boxes, laundry, paint cans and cleaning supplies well away from any gas appliance. Clutter can block air supply, and some stored products give off vapors that should never be near a flame.
Check the Outside Vent
From the outside, look at the vent cap if you can see it safely from the ground. Snow drifts after an upslope storm, leaves or a visible nest can block exhaust. If something looks blocked, do not run the appliance and call for service.
Read the Label, but Know Your Limits
Most gas appliances have a label from the manufacturer with relighting information. If you are not completely comfortable with it, or if the pilot will not stay lit afterward, stop there. Repeated attempts can hide a real problem.
How Louisville’s Climate and Altitude Play a Role

Local conditions affect gas appliances in ways homeowners in other parts of the country do not always deal with.
Altitude and Combustion
Louisville sits around 5,300 feet, where the air holds less oxygen than it does at sea level. Gas appliances in our area need to be set up correctly for that altitude. When they are not, the flame can burn poorly, and pilot problems are one possible symptom.
Wind, Dry Air and Dust
Gusty winds along the Front Range can push air down flues and chimneys. Our dry climate also means more dust in basements and garages, which works its way into small pilot openings over time.
Seasonal Startups
NWS Boulder puts the average first fall freeze in early to mid October. That is often the first time a furnace, boiler or fireplace has run in months, and it is when hidden pilot problems show up. A fall tune-up before that first cold snap catches many of them early.
How Precision Plumbing Heating, Cooling & Electric Fixes Pilot Problems
When you call us because your pilot light keeps going out, our technicians do more than relight it and leave.
Testing, Not Guessing
We inspect the pilot flame, test the thermocouple or thermopile, check the gas control, look at venting and air supply and check for drafts around the appliance. That way we fix the actual cause.
Clear Options and Upfront Pricing
Our technicians explain all options before work starts. Many fixes are a part replacement and cleaning. If the appliance is old and has several problems, we will tell you honestly whether repair still makes sense. Pricing varies by appliance and part, so we always give you an upfront estimate first. Financing is available through Service Finance Company for larger projects.
Ongoing Maintenance
Regular furnace maintenance keeps pilot assemblies clean and catches worn parts before they leave you in the cold. We service and repair most brands of equipment for homeowners across Louisville, Superior, Lafayette and Broomfield.
Want to stop the pilot problems before winter really sets in? Book an inspection with our team.
Frequently Asked Questions
Is It Dangerous When a Pilot Light Goes Out?
A pilot going out by itself is usually not dangerous because the safety sensor shuts off the gas. The concern is the cause. Venting problems, gas supply issues or a failing control can be safety risks. If you smell gas, leave the home and call Xcel Energy at 800-895-2999 or 911 from outside. Otherwise, have a technician find out why it keeps happening.
Can I Keep Relighting My Pilot Light?
Relighting once, following the manufacturer’s label, is something many homeowners do. Relighting it repeatedly is not a fix. Each outage means something is wrong with the flame, the sensor, the gas supply or the airflow. If you have had to relight it more than once, call Precision Plumbing Heating, Cooling & Electric at (720) 464-4485 to have it tested.
What Color Should a Pilot Light Be?
A healthy pilot flame is mostly blue and steady, and it should wrap around the thermocouple or thermopile tip. A yellow, orange or floating flame can point to a dirty pilot, poor air supply or incomplete combustion. Do not ignore it. Turn off the appliance if you can do so safely and have a licensed technician inspect it.
How Long Does a Thermocouple Last?
There is no single answer, because lifespan depends on the appliance, how often it runs and how clean the flame is. Thermocouples are a wear part and do fail over time. When our technicians find a weak one, replacement is usually a fairly quick repair. We will test it first so you are not paying for a part you do not need.
Does My Newer Furnace Have a Pilot Light?
Many newer furnaces use electronic ignition, such as a hot surface igniter, instead of a flame that burns all the time. If you do not see a small steady flame through the viewing window, you may not have a standing pilot at all. Ignition problems on those systems have different causes, and our furnace technicians can diagnose them.
Should I Repair or Replace an Appliance With a Bad Pilot?
Most pilot problems are repairable with a part replacement and a good cleaning. Replacement starts to make sense when the appliance is older, has several other issues or keeps needing repairs. Our technicians explain all options and give you an upfront estimate, so you can make the call that fits your home and budget.
Get Reliable Heat and Hot Water Back in Louisville
A pilot light keeps going out for a reason, and finding that reason is the key to steady heat and hot water all winter. If you are in Louisville, Boulder, Superior, Lafayette, Erie or Broomfield, call Precision Plumbing Heating, Cooling & Electric at (720) 464-4485. Our licensed technicians work out of our office at 413 S Arthur Ave, Louisville, CO 80027 and serve homeowners across Boulder County and the greater Denver metro area. Learn more about our local team on our Louisville service page.
Ready to Get Started with Precision Plumbing Heating, Cooling & Electric?
Whether it is your furnace, water heater, boiler or fireplace, our team is ready to help. Call (720) 464-4485 or reach out online to schedule service with a licensed technician who has your safety in mind. Visit Precision Plumbing Heating, Cooling & Electric at 413 S Arthur Ave, Louisville, CO 80027.